Monobloc Aerosol Can Line
Varnish Coating Machine
This Machine is very compact and rigid in construction used to do lacquer varnish of Cans after printing. This machine is design in 10 stations turret with manifold indexer mechanism.
| Sr. Nos. | Technical Data | ||
|---|---|---|---|
| 1 | Min. & Max. Dia. Printing Cans Size | 25mm to 66mm | |
| 2 | Can Length Maximum | 250mm | |
| 3 | Speed Per Min Can | 60 | |
| 4 | Main Motors | 2HP | |
| 5 | Approx. Height | 1200mm | |
| 6 | Approx. Width | 1200mm | |
| 7 | Approx. Length | 1200mm | |
| 8 | Approx. Weight | 1500Kgs | |
Cans are auto feed by pusher feed mechanism with manual loading of Cans on conveyor, but after varnish coat, Cans take out will be done manually. Fix dug drive speed and fix mandrel drive in manual machine.
Cans are auto feed by pusher feed mechanism with auto or manual loading of Cans on partition gravity conveyor. Pick-n-place mechanism will be used after wet varnish coating to transfer the Cans onto oven chain for drying. Dug drive is separate with geared motor variable drive. Mandrel Drive is separate & variable. Machine main drive is variable with gearbox 3HP as oven also driven for synchronization. This way we can run machine separately. No can no varnish operation. If complete decoration line to be driven full auto with synchronization than common drive for coating, printing & varnish machine with oven can be designed. This way decoration unit works as single unit and not individual machine. Level of automation can be incorporated in decoration line as per client requirement.
(a) One set of Mandrels