Aluminium Collapsible Tube Line
Lacquer Machine
This medium-sized machine varnishes the inner walls of 60 collapsible Tubes per minute. The machine is equipped with two Spray Guns for Double Spray. Lacquer Machine is vertically design in two size 16 cups or 32 cups with turret indexing in manifold mechanism. An exhauster is fitted in the machine for the exhaustion of the Superfluous Spray clouds. This part of the Machine is entirely protected by sheet walls coming up to the outer edge of the Turn Table.
The Spray Guns are fixed on a vertical sledge moving rhythmically up and down. The Spray Guns only works when Compressed Air is led to them. The Compressed Air feed can be regulated by air valve. The opening of this valve brings air to the Spray Guns even when the Machine itself is not working. This is necessary to adjust the Spraying duration in according with length of the tubes. Spray for different tube lengths are achieved with adjustable on-off timer. No tube no spray.
After the first Coating of Lacquering is dry, and the second Coat is then sprayed as well the Tube is then taken out for Drying of the Lacquer Tubes to be fed in the Drying Oven for the Drying of Tubes. Feeding and take out of Tubes is manual.
| Technical Data | |||
|---|---|---|---|
| Sr. Nos. | Capacity of Machine | ||
| 1 | Speed Per Min Tube | 60 | 100 |
| 2 | Power | 1HP & 0.5HP | 1.5HP & 0.5HP |
| 3 | Spray Guns | 2 Guns | 4 Guns |
| 4 | Heater | 1.5KW | 1.5KW |
| 5 | Approx. Round Dia. | 1200mm | 1500mm |
| 6 | Approx. Height | 1800mm | 2000mm |
| 7 | Approx. Weight | 950kgs | 1400kgs |
This Machine will horizontally design with PLC controls, vacuum drum transfer intermediate zone, & if required IR heating zone area to avoid lacquer dripping. Auto feed & unfeed of tubes. No tube no lacquer operation. Variable Frequency drive system
Tube Holding Cups, Nozzle Set